Electricity Generation from Speed Breaker by Air Compression Method using Wells Turbine

Abstract

The whole world is now running after green energy. The utilization of energy is an indication of the growth of a nation. Maximum consumed energy comes from conventional energy sources like gas, oil, coal, etc. which are limited. It is difficult to meet up the demand with existing conventional energy resources. So, green energy or alternative energy can be the best way to meet increased demand today. Electricity can be produced from the speed breaker which is considered an alternative energy source of power generation. In our country, the speed breaker is about 10 cm in height. Thousands of vehicles run over the road every day which provides huge pressure on the road. A system could be developed to have about 10 cm defection with huge downward pressure energy which would be used to rotate wells turbines by using compressed air. The enormous study had been carried out to improve power generation from speed breaker by using the rack & pinion method and compressed air. But none of the studies is carried out by using wells turbines from compressed air. In our research, a small model has been constructed. From the experimental data, it is seen that an average 500 N Load can give an output of 1V voltage / 0.7A current / 1.71 kWh power.

This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium provided the original work is properly cited.