Variable Step Size P&O MPPT Controller to Improve Static and Dynamic PV System Performances

Abstract

In this paper, a variable step size P&O algorithm is used in order to improve the performance of a photovoltaic system in both dynamic and static plans. The efficiency of the proposed algorithm has been investigated successfully using the BP SX150S solar module connected to the DC-DC derived by a P&O MPPT algorithm. The comparative study results of both conventional fixed step size and the proposed variable step size P&O algorithms prove the effectiveness of the proposed algorithm compared to the standard fixed step size PO MPPT. The proposed algorithm reduces response time between 13.86% and 45.28% and the steady state oscillation between 83.33% and 100% leading to less power loss especially in case of fast changing atmospheric conditions.

This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.